Feature
• Operating Bandwidth 0.1 - 32.1 Gb / s ( the highest setting 56 Gb / s)
• High-quality , low-jitter waveform
• Supports up to 32.1 Gb / s jitter tolerance test (SJ, RJ, BUJ, SSC , and two tone SJ)
• High input sensitivity and wide phase margin - Signal Quality Analysis
• Passive Optical Network burst signal detection and measurement loop
• Optical Interface Support
• Crosstalk test using a multi -channel configuration ( 8-channel )
 


MP1800A Signal Quality Analyzer is a scalable plug-in modular BERT, built-in Pulse Pattern Generator (PPG) supports output of high-quality , high-amplitude signals with high input sensitivity of the BER analyzer (ED) Support Signal Analysis ( such as bathtub jitter and eye diagram measurements ) , is also equipped with various jitter can produce jitter modulation source ( such as SJ / RJ / BUJ / SSC), and supports jitter tolerance testing.




MP1800A supports 0.1到32.1 Gbit / s broadband bit rates for maximum 32 Gbit / s signal integrity analysis of a variety of applications, such as 100GbE (25G x 4), OTU-4 (28G x 4), 32G DP-QPSK , CEI-28G, 32G FC and Infiniband EDR (26 G). A combination of both MP1821A and MP1822A and used to support the next generation of R & D BER test (up to 56 Gbit / s), including the CEI-56G-VSR.

Each PPG or ED module selectable 2 or 4 channels , supports up to 8 -channel 32 Gbit / s multi-channel synchronization. Can be measured simultaneously AOC, QSFP +, CXP and CFP modules, but also to assess crosstalk and skew tolerance.

Combined with the increased use of fourth-order MP1825B generate second-order and third-order pre-emphasis signal, up to 28.1 Gbit / s high-speed interconnects , such as CEI-28G, 32G FC and Infiniband EDR (26G), and fourth-order signal. Pre-emphasis effect is very easy to identify because each order can be changed independently .
MP1800A as a remote terminal and close to the DUT install MP1825B 4 bands increased cable length can be shortened and improved signal quality. By pre-emphasis and accurate jitter tolerance test correction , and transparent input data and clock jitter, support accurate signal integrity test .

Integrated MP1800 series can output up to 3.5 Vp-p high-amplitude signal can be used to assess the EA and EML modulators, optical modulator to improve R & D , production capacity and quality.
With its optical interface support , MP1800A is IEEE802.3-2005 10GBASE-L and E to strengthen the ideal choice for a receiver conformance testing . High accuracy automatic calibration feature ensures excellent measurement repeatability and interconnection capacity.
In addition to generating ITU-T and IEEE burst signal and the auxiliary data to assess E-PON, G-PON and 10GE-PON optical module , the self-timer function and the burst data output from the auxiliary signal can be reduced to improve the assessment of the quality and number of assessments .



■ MP1800A Signal Quality Analyzer
  Color LCD screen 8.4 inches TFT, 800 × 600 pixels
  Peripheral Interface VGA output (SVGA), USB 1.1 (3 ports )
  Remote Interface GPIB [MP1800A-001], LAN (2 ports ) [MP1800A-002]
  Dimensions and weight 320 (W) × 177 (H) × 450 (D) mm, ≤ 13 kg ( no modules )


■ MT1810A 4Slot Chassis
  Remote Interface LAN (2 ports )
  Dimensions and weight 350 (W) × 132.5 (H) × 400 (D) mm, ≤ 13 kg ( no modules )


■ MU181000A 12.5 GHz Synthesizer
  Frequency range 0.1 GHz to 12.5 GHz
  Output number one port
  Jitter modulation function is available (MU18100A-001)


■ MU181000B 12.5 GHz 4 port Synthesizer
  Frequency range 0.1 GHz to 12.5 GHz
  Output Number 4 ports
  Jitter modulation function is available (MU18100B-001)


■ MU181500B Jitter Modulation Source
  Jitter clock outputs MU181000A / B or external synthesizer
  Frequency range MU181000A / B combination : open
  0.800 001 GHz to 1.562 500 GHz
  1.600 001 GHz to 3.125 000 GHz
  3.200 001 GHz to 6.250 000 GHz
  6.400 001 GHz to 12.500 000 GHz
  12.800 002 GHz to 15.000 000 GHz

  MU181000A / B, a combination of : off , or an external synthesizer
  0.8 GHz to 15 GHz
  Internal modulation source SJ, RJ, BUJ, SSC


■ MU181800A 12.5 GHz Clock Distributor
   0.1 GHz to 12.5 GHz
  Number of distributed four ports


■ MU181800B 14 GHz Clock Distributor
  Frequency range 0.1 GHz to 14 GHz
  Quantity distribute five ports


■ MU181020A 12.5 Gbit / s PPG
  Model MU181020A-001 MU181020A-002
  Working bit rate of 1/ 1 mode : 9.8 Gbit / s to 12.5 Gbit / s 0.1 Gbit / s to 12.5 Gbit / s
  1 /2 mode : 4.9 Gbit / s to 6.25 Gbit / s
  1/ 4 mode : 2.45 Gbit / s to 3.125 Gbit / s
  1/ 8 mode : 1.225 Gbit / s to 1.5625 Gbit / s



  Model No option MU181020A-010 MU181020A-011 MU181020A-012 MU181020A-013
  Amplitude / output level MU181020A-001
  H: 0 V, L: -0.5 V
  MU181020A-002
  H: 0 V, L: -1.0 V 0.05 Vp-p to
  0.8 Vp-p 0.25 Vp-p to
  2.5 Vp-p 0.05 Vp-p to
  2.0 Vp-p 0.5 Vp-p to
  3.5 Vp-p


■ MU181020B 14 Gbit / s PPG
  Working bit rate 0.1 Gbit / s to 14 Gbit / s (MU181020B-002)



  Model No option MU181020B-011 MU181020B-012 MU181020B-013
  Amplitude / Output Level H: 0V, L: -1.0 V 0.25 Vp-p to 2.5 Vp-p 0.05 Vp-p to 2.0 Vp-p 0.5 Vp-p to 3.5 Vp-p


■ MU181040A 12.5 Gbit / s ED
  Model MU181040A-001 MU181040A-002
  Working bit rate 9.8 Gbit / s to 12.5 Gbit / s 0.1 Gbit / s to 12.5 Gbit / s
  Input sensitivity <50 mVp-p (12.5 Gbit / s, PRBS231-1) 10 mVp-p (typ.) (12.5 Gbit / s, PRBS231-1)
  Clock Recovery Available Available (MU181040A-020)


■ MU181040B 14 Gbit / s ED
  Working bit rate 0.1 Gbit / s to 14 Gbit / s
  Input sensitivity 20 mVp-p ( typ ) (14 Gbit / s, PRBS231-1)
  Clock recovery available (MU181040B-020)


■ MU182020A 25 Gbit / s 1ch MUX
  Model No option MU182020A-001
  Working bit rate 8 Gbit / s to 25 Gbit / s 8 Gbit / s to 28 Gbit / s



  Model MU182020A-010 MU182020A-011 MU182020A-013
  Output Number 2 (Data, xData)
  Amplitude / output level 0.25 Vp-p to 1.75 Vp-p 0.5 Vp-p to 2.5 Vp-p 0.5 Vp-p to 3.5 Vp-p


■ MU182040A 25 Gbit / s 1ch DEMUX
  Model No option MU182040A-001
  Working bit rate 8 Gbit / s to 25 Gbit / s 8 Gbit / s to 28 Gbit / s
  Enter the number 2 (Data, xData)
  Input sensitivity 50 mVp-p ( typ ) (25 Gbit / s, PRBS231-1)


■ MU182021A 25 Gbit / s 2ch MUX
  Model No option MU182021A-001
  Working bit rate 8 Gbit / s to 25 Gbit / s 8 Gbit / s to 28 Gbit / s



  Model MU182021A-010 MU182021A-011 MU182021A-013
  Output Number 4 (Data1, xData1, Data2, xData2)
  Amplitude / output level 0.25 Vp-p to 1.75 Vp-p 0.5 Vp-p to 2.5 Vp-p 0.5 Vp-p to 3.5 Vp-p


■ MU182041A 25 Gbit / s 2ch DEMUX
  Model No option MU182041A-001
  Working bit rate 8 Gbit / s to 25 Gbit / s 8 Gbit / s to 28 Gbit / s
  Enter the number 4 (Data1, xData1, Data2, xData2)
  Input sensitivity 50mVp-p ( typ ) (25 Gbit / s, PRBS231-1)


■ MU183020A 28G/32Gbit/s PPG
  Model No option MU183020A-001
  Work bit rate 2.4 Gbit / s to 28.1 Gbit / s 2.4 Gbit / s to 32.1 Gbit / s



  Model MU183020A-012 MU183020A-013 MU183020A-022 MU183020A-023
  Output Number 2 (Data, xData) 2 (Data, xData) 4 (Data1, xData1,
  Data2, xData2) 4 (Data1, xData1,
  Data2, xData2)
  Amplitude / Output Level 0.5 Vp-p to 2.0 Vp-p 0.5 Vp-p to 3.5 Vp-p 0.5 Vp-p to 2.0 Vp-p 0.5 Vp-p to 3.5 Vp-p


■ MU183021A 28G/32Gbit/s 4ch PPG *
  Model No option MU183021A-001
  Work bit rate 2.4 Gbit / s to 28.1 Gbit / s 2.4 Gbit / s to 32.1 Gbit / s



  Model MU183021A-012 MU183021A-013
  Number of outputs 8 (Data1, xData1, Data2, xData2,
  Data3, xData3, Data4, xData4) 8 (Data1, xData1, Data2, xData2,
  Data3, xData3, Data4, xData4)
  Amplitude / Output Level 0.5 Vp-p to 2.0 Vp-p 0.5 Vp-p to 3.5 Vp-p
* Upcoming release

■ MU183040A 28G/32Gbit/s ED
  Model No option MU183040A-001
  Work bit rate 2.4 Gbit / s to 28.1 Gbit / s 2.4 Gbit / s to 32.1 Gbit / s



  Model MU183040A-010 MU183040A-020
  Output Number 2 (Data, xData) 4 (Data1, xData1, Data2, xData2)
  Input sensitivity 50 mVp-p ( typical ), 28 Gbit / s, PRBS231-1 50 mVp-p ( typical ), 28 Gbit / s, PRBS231-1


■ MU183041A 28G/32Gbit/s ED *
  Model No option MU183041A-001
  Work bit rate 2.4 Gbit / s to 28.1 Gbit / s 2.4 Gbit / s to 32.1 Gbit / s



  Model MU183041A-010
  Number of outputs 8 (Data1, xData1, Data2, xData2, Data3, xData3, Data4, xData4)
  Input sensitivity 50 mVp-p ( typical ), 28 Gbit / s, PRBS231-1
* Upcoming release

■ MU181600A Optical Transceiver (XFP)
  Power input (TD) Differential Input: 0.2 Vp-p to 0.8 Vp-p
  Power input (RD) Differential Input: 0.3 Vp-p ( minimum ), 0.9 Vp-p ( max )
  Optical input / output depends on the load of the XFP module


■ MU181601A Optical Transceiver (SFP)
  Power input (TD) single-ended input : 0.25 Vp-p to 0.6 Vp-p
  Power input (RD) single-ended input : 0.18 Vp-p ( minimum ), 1.0 Vp-p ( max )
  Optical input / output depends on the load of the SFP module


■ MU181620A Stressed Eye Transmitter
  Working bit rate 0.1 Gbit / s to 12.5 Gbit / s
  Connector FC connector (PC -based ), MU181620A-037
  SC connector (PC -based ), MU181620A-040 user-replaceable



  Model MU181620A -001 or -003 MU181620A -002 or -003
  Wavelength of 1310 nm 1550 nm
  Functional Overview reference light source ( change the extinction ratio , output power control , jitter impression , high-quality waveform )



  Model MU181620A -011 or -013 MU181620A -012 or -013
  Wavelength of 1310 nm 1550 nm
  Features Overview meets IEEE802.3-2005 10GBASE-L and E strengthen Receiver Conformance Test Specification
  Highly reproducible (± 0.3 dB) ( measured power loss )
  Can be used as a reference source


■ MU181640A Optical Receiver
  Working bit rate 0.1 Gbit / s to 12.5 Gbit / s
  Connector FC connector (PC -based ), MU181640A-037
  SC connector (PC -based ), MU181640A-040 user-replaceable








MP1800 Series analyzer applies to:
Ultra- high-speed backplane test solutions - crosstalk and jitter tolerance testing increased 40 + Gb / s optical modulation test solutions - I / Q signal transmission test equipment 100Gb Ethernet test solutions - a variety of high-quality optical module test signal and high-speed production solutions connectors - low cost and low power passive optical network devices burst data to assess
Available applications are:
Eye redundancy , Q factor measurement , ISI BER analysis, eye pattern and jitter bathtub curve generation and jitter tolerance testing SONET / SDH / 1GbE/10GbE Pattern EditorPON